Panels and tabs

Everything here works the same in a folder on your disk, inside an archive, on a server and in search results, unless it says otherwise.

Moving around

Key What it does
↑ ↓ Cursor up and down
Page Up Page Down A page up and down
Home End To the top and the bottom
Enter Open what is under the cursor
Backspace Go Up, to the folder above
⌥← ⌥→ Back and Forward
Tab Switch to the other panel
⌥F1 Go to Places

Go Up puts the cursor on the folder you came out of. At the top of a disk it goes to Places.

Opening items

What Enter (or a double click) does depends on what is under the cursor:

  • A folder: goes into it. A symlink to a folder goes in under the link’s own path; right-click the link’s step of the path and Use the Real Path to go where it points.
  • An archive: goes inside, an archive inside it too. One locked with a password asks for it in the status bar.
  • A document that is a zip inside, such as a .xlsx: opens the document. Open as Archive ⇧Enter goes inside instead.
  • A file on your disk: opens in its app. A rule in Preferences ▸ Execution can name another app for a kind of file; it wins over the system’s choice and never changes it. Pictures open in Commander’s viewer to start with (the All pictures rule there).
  • A file inside an archive or on a server: nothing, on purpose, except a picture, which opens in the viewer. View any file with F3, or copy it out first.

Type to find

Type the first letters of a name, and the cursor jumps to the first item that starts with them. Case doesn’t matter. Typing the same letter again steps to the next item that starts with it.

What you typed shows in the status bar: the letters that found something in green, the rest in red. Two seconds after your last letter, it is forgotten and you can start again.

Click to view

Going to a path

  • Edit Path ⌘L, or the pencil at the end of the path, turns the path into a field. Type or paste a path and press Enter.
  • Go to the Path on the Clipboard ⇧⌘G goes straight to a path you copied somewhere else.

Both take a full path. ~ means your home folder, quotes around the path are fine, and so is a file:// address. A path to a file opens its folder with the cursor on the file. When only part of the path exists, the panel goes as far as it can and says what is missing.

Inside an archive or on a server, a path from its own top goes there. Another server’s address can’t be typed in; open it from Places.

Back and Forward

Back ⌥← and Forward ⌥→ follow where you have been, up to 50 places each way, separately in each tab.

  • Back after Go Up takes you back into the folder you left, with the cursor where it was.
  • Back from search results returns to the folder you searched.
  • Back to a folder that was deleted stops at the nearest folder still there.

The trail starts empty each time you open Commander.

Selecting

  • Space selects or deselects the item under the cursor. The cursor stays where it is.
  • ⇧↑ ⇧↓ and ⇧ with Page Up or Page Down flip each item the cursor leaves: a selected one is deselected. ⇧Home and ⇧End flip everything from the cursor to that end.
  • Select All ⌘A selects every item you can see; hidden ones stay out. Deselect All ⇧⌘A. Both are also switches in the status bar.
  • With the mouse: ⌘-click (Ctrl-click on Windows and Linux) selects or deselects an item, and ⇧-click adds everything from the cursor to that item.

The status bar counts the selected items: 10 of 11 items • 2 selected. Going to another folder clears the selection.

Tabs

Each tab has its own folder, cursor, columns, sorting, hidden-files setting and Back and Forward trail. Only the tab in front reads its folder; the others wait until you bring them up.

  • New Tab ⌘T opens where Enter on the cursor would go: into the folder, archive or bookmark under it, or this folder when the cursor is on a file. The new tab takes the columns, sorting and hidden-files setting of the one it came from.
  • Close Tab ⌘W, or a middle click on the tab. A panel always keeps one tab.
  • Next Tab ⌃Tab or ⇧⌘], Previous Tab ⌃⇧Tab or ⇧⌘[. On Windows and Linux: Ctrl+Shift+] and Ctrl+Shift+[.
  • Drag a tab to move it. Move the Tab Left and Move the Tab Right do the same from the keyboard once you give them keys.
  • Drop files on a tab to copy them into its folder.

A locked tab stays in its folder for good. Opening a folder from it, Go Up, Back, a click on the path or a search all open a new tab beside it, and the locked tab can’t be closed. Lock and unlock a tab from its right-click menu.

A locked tab can also have a name of its own: Rename Tab… in its menu asks for it in the status bar. An empty name gives it back its folder’s name.

When you quit, every tab is kept with its folder, lock, name, columns and sorting, and the panels come back as they were.

Click to view

Columns

Right-click the column header to choose the columns of the tab: Size, Packed, Perms, Modified, Created, Content, Ext, Preview, Tags and Git. Name is always there. Each place offers the columns it has:

Place Columns besides Name
A folder on a Mac Ext, Tags, Git, Size, Perms, Modified, Created, Preview
A folder on Linux Ext, Git, Size, Perms, Modified, Created, Preview
A folder on Windows Ext, Git, Size, Modified, Created, Preview
A zip and most archives Ext, Size, Packed, Perms, Modified
The tar family Ext, Size, Perms, Modified
An SFTP server Ext, Size, Perms, Modified
An FTP server Ext, Size, Modified
Search results Ext, Size, Modified, Content when searching for text, and Git for Changed in git
  • Preview shows a small picture of every image; Preview Size in the same menu sets how big, for the whole app.
  • Tags shows the Finder’s tags.
  • Git shows what git says of each row as coloured squares: see The Git column.
  • Apply to All Tabs gives this tab’s columns to every tab in both panels, and Restore to defaults puts back the columns and the sorting Commander started with.

Columns fit their content by themselves; there is nothing to drag.

Click to view

Sorting

Click a column’s title to sort by it, and click again to reverse. .. stays at the top and folders come before files, either way. Names sort alphabetically regardless of case, letter by letter: file10 comes before file2.

Preferences ▸ Columns ▸ Sorting decides where symlinks to folders, archives and names starting with a dot go: mixed in with the rest, or in a group of their own.

Folder sizes

A folder’s Size is empty until you ask for it. Compute Size ⌘Enter counts the selected folders, or the one under the cursor, all the way down, and fills in the size of every folder inside as it goes. Go into one and its subfolders already show their sizes. A ~ after a size means something inside has changed since.

Compute Size works on your disks and inside archives, not on servers or in search results. Sort by Size afterwards to find what takes the space.

Preferences ▸ Columns ▸ Size sets how every size in the app is written: 1024 or 1000 bytes to a kilobyte, KiB, KB or kB, the largest unit and the decimal places.

Click to view

Hidden and system files

Hidden and System Files ⌘., or the eye in the status bar, steps the tab through three states: files, then hidden files too, then system files as well. The eye is plain, then in the accent colour, then red.

  • Hidden on a Mac and on Linux is a name starting with a dot. On Windows it is the hidden attribute. In archives and on servers, a dot everywhere.
  • System files are the ones the systems leave behind, such as .DS_Store, Thumbs.db, desktop.ini, .Spotlight-V100 and names starting with ._.

Each tab keeps its own setting, also after a restart.

Drag and drop

Drag items onto a folder in either panel, onto the panel itself, onto a step of the path or onto a tab. Dragging a selected item takes the whole selection.

  • A drop copies. Hold ⌘ on a Mac, or Shift on Windows and Linux, to move.
  • Commander asks before it starts (Preferences ▸ Confirmations ▸ Confirm a drag and drop), then the copy or move runs as a task.
  • Files can be dropped in from the Finder or Explorer. On a Mac, files from your disks can be dragged out to other apps, too.
  • Dropped on Places, items are bookmarked instead of copied.
  • Esc cancels a drag.

The other panel

  • Open in the Left Panel ⌘← and Open in the Right Panel ⌘→ send the other panel where the cursor’s item leads. On a file, the other panel opens this folder with the cursor on that file.
  • With ⇧ added, a symlink sends the other panel to where it really points.
  • Swap the Panels ⌘U swaps the two panels with all their tabs.

Folders update themselves

A folder on your disk is read again every second while you can see it, and changed items pulse for a moment. Archives are checked every two seconds. Servers and search results are not watched: go out and back in to read a server folder again. How Commander thinks says more.